Speecys is the Trade Marks of our "Robot Development Platform".

SPC-101C creates new robot market category and integrates Robot Technology and Information Technology.

Specifications

Height: 33cm
Weight: 1.5kg
Freedom of Joint: 22＋LED Display
2 Speakers (Stereo)
LED Display 105 (Hands and Chest)
270,000-pixel CMOS Color Video camera LiPo Battery 7.4V 780mA or AC Adaptor (Rechargeable）
CPU RPU-50 (Futaba Corp.)
　 - SH3 133MHz
　 -RAM: 64MB, Flash: 64MB,
　 -miniSDSlot
　 -RS485, USB, Serial
　 -Audio
Servo RS301CR (Futaba Corp.)
OS SpeecysOS Rev.2.0
　 - NetBSD Base, with Robot control function
Wireless LAN.IEEE802.11G (USB)

Accessory

LiPo Battery
AC adapter
Wireless LAN adapter
Stand
Manual
Motion Editor
　 *You can download Motion Editor on Web.

*SPC-101C is a assembled robot
*SPC-101C needs PC, access point for wireless LAN and Internet connection.
*Video capture or up-scan converter is needed if you need videopicture on your PC.
*Product specification subject to change without notice.
*Speecys is a trade mark of Speecys Corporation

Robot Program downloadable via Internet servers
RTML: Robot Transaction Markup Language makes content handling easy by transfer service request or response with HTTP protocol. Using simple HTTP protocol, SPC-101C can easily communicate with servers independent of network characteristics

SPC-101C uses NetBSD as basic OS in order to get network function and debug ease. Speecys added Motion reproduce engine and walking engine so as to have robot control function on it. As NetBSD is a network OS, it makes use of TCP/IP, UDP/IP protocol that we can transfer motion data or audio data through it with FTP or Telnet function. We also use SOAP as a inter object communication protocol that transfer service request or response with HTTP protocol. Using simple HTTP protocol, SPC-101C can easily communicate with servers independent of network characteristics

OS: NetBSD
Robot Control System: Multi Command servo Control System with Network Protocol
Servo IF: Multi Drop Half Duplex RS485 System
Network IF: Wireless 802.11G
Protocol: TCP/IP, FTP, HTTP,SOAP
Console: Available(RS232C)

With the camera function, SPC-101C can be used as a remote controllable video camera via network like "walking web camera". With the application software on the PC it can do video capture, face recognition and voice recognition also. The software source codes available on our web site, so IT software engineers can program robot application easily.

SPC-101C can be used in many different use cases.
At first you can use Motion Editor for motion creation, then you could know how robot moves and how you can control it. Next step is making network applications with SPC-101C network robot IF. That makes users control SPC-101C via network easily. You may develop Internet content servers fot SPC-101C if needed . Finally, you may develop system program for the robot inside. You can use SPC-101C according to your need and skill.

You can create SPC-101C motions and sounds, voices, LED Lights with Motion Editor.
Then you can send it to the robot and control it through wireless LAN.

Many levels of SDK are prepared for multi purpose development.

Robot Application Development IF: " OpenRoads "

In order to set simple and easy programming interface of robot application, we released "OpenRoads（Open Robot Operation and Design Specification）" IF for Robot Application Development. It can be used openly and freely without any Royalty. It can be used commercially without any Royalty also. Please look at " Terms and Condition".